Omnitron Systems Technology OmniConverter GPoE+/Sx User Manual

Unmanaged 8-port poe/poe+ switch
Hide thumbs Also See for OmniConverter GPoE+/Sx:

Advertisement

Quick Links

OmniConverter
GPoE+/Sx
Unmanaged
8-Port PoE/PoE+ Switch

User Manual

38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights reserved. The whole
or any part of this publication may not be reproduced, stored in a retrieval system, translated,
transcribed, or transmitted, in any form, or by any means, manual, electric, electronic, electromagnetic,
mechanical, chemical, optical or otherwise, without prior explicit written permission of Omnitron
Systems Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.: FlexPoint
FlexSwitch
, HybridNID
, iConverter
, miConverter
TM
®
®
RuggedNet
, Omnitron Systems Technology, Inc.
TM
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice. Omnitron Systems
Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This product is warranted to the original purchaser (Buyer) against defects in material and
workmanship for a period of two (2) years from the date of shipment. A five (5) warranty may be
obtained by the original purchaser by registering this product at www.omnitron-systems.com/support
within ninety (90) days from the date of shipment. During the warranty period, Omnitron will, at its
option, repair or replace a product which is proven to be defective with the same product or with a
product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility, at Buyer's expense.
Omnitron will pay the shipping charge to return the product to Buyer's designated US address using
Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper or inadequate use and/
or maintenance of the equipment by Buyer, Buyer-supplied equipment, Buyer-supplied interfacing,
unauthorized modifications or tampering with equipment (including removal of equipment cover by
personnel not specifically authorized and certified by Omnitron), or misuse, or operating outside the
environmental specification of the product (including but not limited to voltage, ambient temperature,
radiation, unusual dust, etc.), or improper site preparation or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied warranties of
merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron shall not
be liable for any direct, indirect, special, incidental, or consequential damages, whether based on
contract, tort, or any legal theory.
Environmental Notices
The equipment covered by this manual must be disposed of or recycled in accordance with the
Waste Electrical and Electronic Equipment Directive (WEEE Directive) of the European Community
directive 2012/19/EU on waste electrical and electronic equipment (WEEE) which, together with
the RoHS Directive 2011/65/EU, for electrical and electronic equipment sold in the EU after July
1, 2006. Such disposal must follow national legislation for IT and Telecommunication equipment in
accordance with the WEEE directive: (a) Do not dispose waste equipment with unsorted municipal
and household waste. (b) Collect equipment waste separately. (c) Return equipment using collection
method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it must be
collected separately from other types of waste. In case of small items the symbol
may be printed only on the packaging or in the user manual. If you have questions
regarding the correct disposal of equipment go to www.omniton-systems.com/support
or e-mail to Omnitron at intlinfo@omnitron-systems.com.
, NetOutlook
, OmniLight
, OmniConverter
TM
®
®
, OST
and the Omnitron logo.
TM
TM
Page 2
TM
,
,
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OmniConverter GPoE+/Sx and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Omnitron Systems Technology OmniConverter GPoE+/Sx

  • Page 1: User Manual

    Omnitron Systems Technology, Inc. The following trademarks are owned by Omnitron Systems Technology, Inc.: FlexPoint FlexSwitch , HybridNID...
  • Page 2: Product Overview

    1) Configure DIP-switches Powered Device (PD) partner. When negotiating to PoE (IEEE 802.3af) it delivers DIP-switches are located on the side of the OmniConverter GPoE+/Sx. The up to 15.4 Watts per RJ-45 port. When negotiating to PoE+ (IEEE 802.3at) it delivers DIP-switches are used to configure modes of operation, networking features and up to 30 Watts per RJ-45 port.
  • Page 3: Sw1 And Sw2: Mode Of Operation

    SW1 and SW2: Mode of Operation Two fiber ports models can be configured for Directed Switch Mode and Fiber Redundancy (per DIP-switches 3 and 4), traffic is forwarded to both the primary The GPoE+/Sx supports Switch, Directed Switch and Dual Device mode. and secondary fiber ports.
  • Page 4: Sw3 And Sw4: Fiber Redundancy

    When configured for Dual Device Mode and Directed Switch Mode, the traffic from Fiber redundancy is only supported on GPoE+/Sx models with two fiber ports. Ports 1 - 4 is only forwarded to fiber port F1 and Ports 5 - 8 are only forwarded to When configured for Redundant Mode “no return to primary”, the fiber ports operate fiber port F2.
  • Page 5: Connect Cables

    Reset” position, the module will disable PoE output power for 2 seconds following 3) Connect Cables a loss of receive link on any fiber port. When using SFP models, insert the SFP fiber transceiver into the SFP When fiber redundancy is enabled, the loss of fiber link on either F1 or F2 will not receptacle on the front of the module (see the SFP Data Sheet 091-17000-001 cause the PD to be re-initialized even though the PSE Reset is enabled.
  • Page 6: Verify Operation

    4) Verify Operation RJ-45 Ports LED Indicators Verify the GPoE+/Sx is operational by viewing the LED indicators. Legend Indicator Description Power No link LED Indicators Green - ON Port linked at 100Mbps Legend Indicator Description Green - Blinking at 10Hz Port data activity at 100Mbps Unit not powered Amber -ON...
  • Page 7: Specifications

    Compliances IEEE 802.3at (30 watts max) Fax: (949) 250-6514 PoE Supported Modes IEEE Alternate A (Alt A) Address: Omnitron Systems Technology, Inc. Regulatory Compliances* UL, CE, FCC Class A 38 Tesla Environmental REACH, RoHS2 and WEEE Irvine, CA 92618, USA...

Table of Contents