Removing & Installing Body Components; Seat - Honda CBR650F 2014 Owner's Manual

Removing & Installing Body Components

Seat

Front prong
Rear prongs
Rear stays
Front stay
Seat
Ignition key
Seat lock
❙
Removal
1. Insert the ignition key into the seat lock,
and turn and hold the key clockwise to
unlock the seat.
2. Pull the rear of the seat back and up.
❙
Installation
1. Insert the front prong into the front stay
on the frame.
2. Insert the rear prongs into the rear stays
on the frame.
3. Push forward and down on the rear of the
seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.
The seat locks automatically when installed.
Take care not to lock your key in the
compartment under the seat.
59