Honda CBR650F 2014 Owner's Manual page 66

Engine Oil u Changing Engine Oil & Filter
Rubber
seal
7. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8. Install a new oil filter and tighten.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
64
Oil filter
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m).
10. Fill the crankcase with the recommended
oil ( P. 51) and install the oil fill cap/
2
dipstick.
Required oil
When changing oil &
engine oil filter:
3.1 US qt (2.9 liters)
When changing oil only:
2.7 US qt (2.6 liters)
11. Check the oil level.
12. Check that there are no oil leaks.
P. 61
2