Honda CBR650F 2014 Owner's Manual page 97

2. Make sure that the slot on the brake
caliper bracket is positioned in the lug on
the swingarm.
Brake caliper
bracket
3. Adjust the drive chain.
4. Tighten the rear axle nut.
Torque: 72 lbf·ft (98 N·m, 10.0 kgf·m).
Slot
5. Hold the adjusting bolts and tighten the
lock nuts.
Torque: 20 lbf·ft (27 N·m, 2.8 kgf·m).
6. After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
Lug
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Tire Puncture u Removing Wheels
P. 72
2
95