What Do You Do In Case Of Operating Malfunctions - DeDietrich DOP440 Series User Manual

99633781ml.qxd 07/09/04
W
hat do you do in case of operating
malfunctions?
If you have a doubt about the functioning of your oven, this does not ne-
cessarily mean that there is a malfunction. In any event,
check the following items:
Y
ou notice that...
The oven is not heating.
The temperature indicator is fla-
shing.
The oven light is not working.
The pyrolysis cleaning cycle does
not begin.
Your oven starts beeping.
Your oven displays
44
14:39 Page 44
P
ossible causes
• The oven is not connected.
• The fuse in your electrical set-up
is not working.
• The selected temperature is
too low.
• Problem with the door's locking
mechanism.
• The light is out of order.
• The oven is not connected or the
fuse is not working.
• The door is not properly closed.
• The locking system is defective.
+ -
• During cooking.
Réglages
• At the end of a cooking
programme.
• When the touch controls are
pressed.
• Controls are locked for child
safety.
W
hat should you do?
- Connect the oven.
- Replace the fuse in your electrical
set-up and check its capacity (16A).
- Increase the selected
temperature.
- Call the After Sales Service Depart-
ment.
- Replace the light.
- Connect the oven or replace
the fuse.
- Verify that the door is locked.
- Call the After Sales Service
Department.
- The recommended temperature
of your choice has been reached.
- Your programmed cooking cycle
is finished.
- Working normally.
- To cancel the lock, hold down
the Stop touch control until the
symbol disappears.