If You Have a Flat Tire
Emergency Wheel Removal/Installation
Refer to Safety Precautions on page 91.
Removal
1. Park your Honda SXS on a firm, level surface.
2. Loosen — but do not remove — the wheel nuts.
3. Raise the front (or rear) wheels off the ground (page 110).
4. Remove the wheel nuts.
5. Remove the wheel.
• Avoid getting grease, oil, or dirt on the disc or pad surfaces
when removing and installing each wheel. Any contamination
can cause poor brake performance or rapid pad wear after
reassembly.
200
Taking Care of the Unexpected
wheel nuts
wheel nuts
wheel rim