Center Rear Panel Removal - Honda Pioneer SXS500M 2019 Owner's Manual

Center Rear Panel Removal

Refer to Safety Precautions on page 91.
The center rear panel must be removed for spark plug maintenance,
to change the engine oil filter, to clean the air cleaner.
Removal
1. Remove the seat back (page 107).
2. Release the prongs from their grommets.
3. Pull the center rear panel forward.
tabs
prongs
center rear panel
Installation
1. Insert the tabs into the holes.
2. Install the prongs into their grommets.
3. Install the center rear panel.
108
Servicing Your Honda
holes
grommets
tab