Front Hood - Honda Pioneer SXS500M 2019 Owner's Manual

Refer to Safety Precautions on page 91.
The front hood must be removed to lubricate the drive mode select
lever pivot, brake light switch adjustment, reverse inhibitor system
adjustment and throttle cable adjustment, to check the coolant level
and for washing the radiator fan area.
Removal
1. Turn the knobs outward.
2. Remove the prongs from the grommets.
3. Remove the front hood.
Installation
1. Insert the hooks into the slots.
2. Install the prongs into the grommets.
3. Turn the knobs inward.
knob
slots
prongs
hooks
grommets

Front Hood

front hood
knob
Servicing Your Honda
105