Setting The Clock; Cassette Player; Listening To A Tape - Sony XR-4807 Operating Instructions Manual

Setting the clock

The clock has a 12-hour digital indication.
For example, setting it to 10:08
1
Press (OFF) or (DSPL) during operation.
2
Press (DSPL) for two seconds.
100
The hour digit flashes.
1 Set the hour digits.
To go forward
To go backward
1000
2 Press (SEL) momentarily.
1000
The minute digits flashes.
3 Set the minute digits.
To go forward
To go backward
1008
3
Press (DSPL) momentarily.
1008
The clock starts.
Note
If the POWER SELECT switch on the bottom of the unit is
set to the B position, the clock cannot be set unless the
power is turned on. Set the clock after you have turned on
the radio.

Cassette Player

Listening to a tape

Insert a cassette.
Playback will start automatically.
If a cassette is already inserted, press
(SOURCE) repeatedly until "TAPE" is
displayed.
TAPE
The side facing up is being played.
TAPE
The side facing down is being played.
Tip
To change the tape transport direction, press (MODE)
(*) during tape playback.
To
Stop playback
Eject the cassette
Fast-winding the tape
During playback, press either side of
(SEEK/AMS) for two seconds.
Fast-forward
SEEK
AMS
Rewind
To start playback during fast-forwarding or
rewinding, press (MODE) (*).
EN
Press
(OFF)
6
5