Front Fork Adjusters - Ducati Monster 620 Owner's Manual

Front fork adjusters

The front fork of 900 models has rebound and
compression damping adjusters.
This adjustment is done using the outer adjusters:
1) (fig. 17) to adjust rebound damping;
2) (fig. 17) to adjust spring preload;
3) (fig. 18) to adjust compression damping.
As you turn the adjusting screws (1 and 3), you will hear
them click. Each click identifies a setting.
Turn the screw all the way in to set the hardest damping
(position 0). This will be your starting point.
Now turn the screw anticlockwise and listen for the
clicks that identify setting positions no. "1", "2" and so
on.
Standard factory setting is as follows:
compression: 6 clicks;
rebound: 6 clicks.
2
fig. 17
E
A
29