Ricoh SH-P1 Series Training page 80

Fusing Pressure Adjustments
Service Adjustment
To increase fusing pressure move the pressure springs [B] from the upper
notch [C] to the lower notch [D].
User Adjustment for Envelopes
The user can change the fusing pressure with the envelope lever [A]. Less
pressure is needed for envelopes, which are thicker than normal paper.
Raise the lever (①) to reduce the pressure. This prevents jams and
wrinkling when printing on envelopes.
Lower the lever to (②) return pressure to normal for all other print jobs.
Normally this lever should be down.
Slide 80
You may need to increase pressure if the customer complains of insufficient
fusing. The factory setting is the upper notch.
[C]
[D]
80
SH-P1 Training