Ricoh SH-P1 Series Training page 109

2.2 Energy Saver Mode: Sleep Mode – 2
The machine recovers to the ready condition:
If data is received
» After warm-up, the job starts, but the operation panel stays
dark.
» Then, after the job is completed, the machine returns to sleep
mode immediately. Panel Off and Low Power modes are
Power
Consumption
skipped.
Warm-up Operation Mode
Ready Mode
Sleep Mode
Plug In
Slide 109
This timing chart shows what happens if data is received while the machine is in
sleep mode.
Power consumption during warm-up may be much higher than shown in this
diagram.
2. Energy Saving
Warm-up
Operation Mode
Data is received
109
Sleep Mode
Time
SH-P1 Training