Download
Share
Print this page
Mocka Zara Console Table Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Mocka Manuals
  4. Indoor Furnishing
  5. Zara
  6. Assembly instructions manual

Mocka Zara Console Table Assembly Instructions Manual

Hide thumbs Also See for Zara Console Table:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Zara Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
bolt
dowel
screw
locking
x6
x14
x12
nut x14
K
L
M
N
felt
cover
screw
bracket
x2
x4
pad
x2
x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
E
G
F
screw
slide
slide
x26
rail x2
rail x2
rail x2
Q
O
P
spring
seal
washer
x8
x2
washer
x8
Hardware Supplied
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
I
H
J
slide
wedge
slide
x4
rail x2
R
S
T
screw
bolt
Allen
x8
x8
key x1
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
screw
x2
x1
1

Advertisement

loading

Related Manuals for Mocka Zara Console Table

Summary of Contents for Mocka Zara Console Table

  • Page 1 Phillips & Flathead screwdrivers For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 2 Insert 4x bolts (C) into panel [1] and tighten with a screwdriver. Attach 1x slide rail (F) and 1x slide rail (G) to panels [3] and [4] as shown and secure with 6x screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 3 (E). Flip the panel [5], attach 1x slide rail (F) to panel [5] secure with 6x locking nuts (D). Tighten with a screwdriver. as shown and secure with 3x screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 4 Attach 2x bracket (M) to panel [2] and secure with 4x screws (E). and [4] to form the back of the unit. Tighten with a screwdriver. Place 2x cover (N) over the bracket (M) as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 5 Attach legs [7] to panel [2] and secure with 8x bolt (R), 8x washer (P), 8x spring washer (Q). Tighten with an Allen key (T). Attach 4x felt pads (L) screws (B). Tighten with a screwdriver. to legs [7] as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 6 Insert 4x bolts (C) into panel [8]. Attach 1x seal (O) to panel [8] and Attach panel [9] and panel [10] to panel [8] and secure with 4x locking secure with 1x screw (E). Tighten with a screwdriver. nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 7 Drawers x2 Slide panel [11] along the grooves between the side panels [9] and [10]. Attach panels [9], [10] and [12] as shown using 4x screws (S). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 8 Ensure the drawers slide easily along the rails. If the door is not catching or sitting flush, twist the end of the cover (N) until it catches on the seal (O). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 9 Fasten to the wall using 1x washers (Z), 1x wall anchor (X) and (W). Tighten with a screwdriver. 1x screws (Y). Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...