Page 1
Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. Attach 2x brackets (P) to panel [1] and secure with 4x screws (E). Place 2x cover (Q) over the bracket (P) as shown. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 3
Zara Two Door Cabinet Assembly Instructions Attach panel [15] to panel [1] secure with 4x screws (O). Tighten with Insert 2x bolts (C) into panel [3]. Tighten with a screwdriver. a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 4
Insert 2x bolts (C) into panel [4]. Tighten with a screwdriver. Attach panel [3] and [4] to panel [6] with 4x dowels (A) and secure with 4x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 5
Attach panel [2] to panel [1] with 2x dowels (A) and secure with 2x locking with 4x locking nuts (D). Tighten with a screwdriver. nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 6
Attach panel [8] to panels [2], [3] and [4] with 6x dowels (A) and secure Slide panels [7] down along the grooves between the panels [2], [3] with 6x screws (B). Tighten with a screwdriver. and [4] as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 7
[11] to panel [10] with 4x dowels (A) and secure with 4x screws (B). as shown. Tighten with an allen key (H). Attach 4x felt pads (K) to the Tighten with a screwdriver. ends of the legs. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 8
Attach panels [12] to panel [10] with 4x dowels (A) and secure with Insert panel [10] to panels [3] and [4]. 4x locking nuts (D). Tighten with a screwdriver mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 9
Tighten with a screwdriver. Ensure the doors open and close easily. If the 2x screws (E). Tighten with a screwdriver. cover (Q) is not catching on the seal (R), adjust the magnetic end by twisting it outwards. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 10
8x screws (L). Tighten with a screwdriver. Attach 1x safety strap (V) and stable. to the top of the back side of the unit as shown using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 11
(V). Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and 1x screw (Y). Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...