Page 1
Phillips & Flathead screwdrivers For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 2
Attach 1x slide rail (G) to panel [5] as shown and secure with 3x screws (E). Flip the panel [5], attach 1x slide rail (F) to panel [5] as shown and secure with 3x screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 3
2x locking nuts (D). Tighten with a screwdriver. shown and secure with 30x screws (E). Tighten with a screwdriver. Insert 12x bolts (C) into panels [3] and [4]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 4
Attach panels [6], [7] and [8] to panel [3] with 4x dowels (A) and secure with 10x screws (E). Tighten with a screwdriver. Place 5x with 6x locking nuts (D). Tighten with a screwdriver. cover (N) over the bracket (M) as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 5
Slide panels [9] down along the grooves between the panels [3] and [4] to form the back of the unit as shown. and secure with 6x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 6
Attach panel [2] to the unit with 4x dowels (A) and secure with 4x Tighten with a screwdriver. Place 1x cover (N) over the bracket (M) screws (B). Tighten with a screwdriver. as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 7
Attach legs [10] to panel [2] using 16x bolts (Q) as shown. Tighten with an Allen key (S). Attach 4x felt pads (L) to the ends of the legs. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 8
4x locking nuts (D). Tighten with a screwdriver. [11]/[12] and secure with 1x screw (E). Tighten with a screwdriver. Attach panel [5] to panels [6] and secure with 1x screws (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 9
Attach panels [13], [14] and [15] to panels [11]/[12] and secure Slide panel [16] along the grooves between the side panels [13] and [14]. with 5x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 10
Attach slide rail (I) and slide rail (H) to the underside of the side panels Tighten with a screwdriver. as shown. Secure with 4x screws (E) and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 11
Attach panels [13] and [14] to panels [18]/[19] and secure with 4x locking nuts (D). Tighten with a screwdriver. [18]/[19] and secure with 1x screw (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 12
Slide panel [20] along the grooves between the side panels [13] and [14] to Attach panels [13], [14] and [21] as shown using 5x screws (R). form the base of the drawer. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 13
Secure with 4x screws (E) and tighten with a screwdriver. is not catching or sitting flush, twist the end of the cover (N) until it catches on the seal (O). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 14
Fasten to the wall using 1x washers (Z), 1x wall anchor (X) and 1x screws (W). Tighten with a screwdriver. 1x screws (Y). Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...