Download
Share
Print this page
Mocka Zara Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Mocka Manuals
  4. Indoor Furnishing
  5. Zara
  6. Assembly instructions manual

Mocka Zara Assembly Instructions Manual

Desk
Hide thumbs Also See for Zara:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Zara Desk
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
screw
bolt
dowel
locking
x16
x8
x16
nut x16
K
L
M
N
felt
cover
screw
bracket
x2
x4
pad
x2
x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
E
G
F
screw
slide
slide
x26
rail x2
rail x2
rail x2
Q
O
P
seal
spring
washer
x8
x2
washer
x8
Hardware Supplied
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
I
H
J
slide
slide
wedge
x4
rail x2
R
S
T
bolt
screw
Allen
x8
x8
key x1
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
screw
x2
x1
1

Advertisement

loading

Related Manuals for Mocka Zara

Summary of Contents for Mocka Zara

  • Page 1 Phillips & Flathead screwdrivers For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 2 Insert 8x bolts (C) into panel [1] and tighten with a screwdriver. Attach 1x slide rail (F) and 1x slide rail (G) to panels [3] and [5] as shown and secure with 6x screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 3 Attach panels [3], [4], [5] and [6] to panel [1] with 8x dowels (A) and as shown and secure with 6x screws (E). Tighten with a screwdriver. secure with 8x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 4 Slide panel [7] along the grooves between the side panel [3] and [4] to form the back of the unit. Tighten with a screwdriver. Place 2x cover (N) over the bracket (M) as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 5 Attach panel [2] to the unit with 8x dowels (A) and secure with 8x screws (B). Tighten with a screwdriver. 8x spring washer (Q). Tighten with an Allen key (T). Attach 4x felt pads (L) to legs [8] as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 6 Insert 4x bolts (C) into panel [9]. Attach 1x seal (O) to panel [8] and Attach panels [10] and [11] to panel [9] and secure with 4x locking secure with 1x screw (E). Tighten with a screwdriver. nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 7 Drawers x2 Slide panel [12] along the grooves between the side panels [10] and [11]. Attach panels [10], [11] and [13] as shown using 4x screws (S). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 8 Ensure the drawers slide easily along the rails. If the door is not catching or sitting flush, twist the end of the cover (N) until it catches on the seal (O). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 9 Fasten to the wall using 1x washers (Z), 1x wall anchor (X) and (W). Tighten with a screwdriver. 1x screws (Y). Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...