Table of Contents
Advertisement
Instruction manual
4.4.2 Ending the charging process via app
When the desired state of charge has been reached,
you can stop the charging process at your vehicle or via
app.
1. Disconnect the charging cable from the electric ve-
hicle. To do this, follow the instructions of your ve-
hicle's instruction manual.
2. Then disconnect the charging cable from the char-
ging station.
3. Stow the charging cable carefully back in your vehic-
le.
Driving eMobility
5 CLEANING
!
CAUTION: Finish charging before cleaning and
maintenance. In addition, disconnect the charging ca-
ble from a possibly connected vehicle. Depending on
the variant, stow the charging cable in your vehicle or
plug the charging plug into the parking position.
You can clean the charging station as follows:
Wipe the outside of the charging station with a dry
cloth.
!
WARNING: The charging station must not be clea-
ned with a water or steam jet cleaner. A short circuit
may be caused.
!
WARNING: Do not use harsh cleaning agents. This
can cause damage to health and the charging station.
6 INSPECTION AND MAINTENANCE
The legislator requires that the charging station and
the associated sub-distribution system be checked
once a year for their function and safety.
The inspection and maintenance of the charging sta-
tion may only be carried out by the manufacturer or by
specialist partners certified by wallbe®.
As a result of the inspection you will receive a protocol,
which you should keep in a safe place.
Please also note chapter 9, Warranty.
6/12
Advertisement
Table of Contents
