Safety Precautions/Parts Descriptions - Harken MKIV OCEAN Unit 3 Installation Manual

Safety Precautions/Parts Description
Introduction
This manual gives technical information on installation and service. This information is destined exclusively for
specialized personnel or expert users. Installation, disassembling, and reassembling by personnel who are not
experts may cause serious damage to property or injury to users and those in the vicinity of the product. If you
do not understand an instruction contact Harken.
The user must have appropriate training in order to use this product.
Harken accepts no responsibility for damage or harm caused by not observing the safety requirements and
instructions in this manual. See limited warranty, general warnings, and instructions in
www.harken.com/en/general-warnings-instructions/
Purpose
Harken Jib Reefing and Furling is designed for rolling sails on sailboats to reduce sail size or to completely roll
®
so wind has little effect on the sail. Use of this product for other than normal sailboat applications is not covered
by the limited warranty.
Safety Precautions
WARNING! This symbol alerts you to potential hazards that may kill or hurt you and others
if you don't follow instructions. The message will tell you how to reduce the
chance of injury.
CAUTION! This symbol alerts you to potential hazards that may hurt you and others if
you do not follow instructions. The message will tell you how to reduce the
chance of injury.
WARNING! Strictly follow all instructions to avoid potential
hazards that may kill or hurt you and others. See
www.harken.com/en/general-warnings-instructions/ for general
warnings and instructions.
2
1
1) Toggle Assembly
2) Short Link Plates
3) Shackles
2
5
3
4
4) Drum Assembly
5) Foil Clamp Screws
6) 2' (610 mm) Bottom Foil
7) Feeder Assembly
MKIV Ocean Unit 3
7
6
8) Connector Bushing
9) Bottom Connector
10) 7' (2.13 m) Foil
11) Connector Screws
9
8
12) Connector
13) Halyard Swivel
14) Trim Cap
15) Trim Cap Screws