Table of Contents
Advertisement
Assembly
Rod Rigging: Rod Adapter Stud
Apply a few drops of red
Loctite
to threads of nosepiece.
®
Screw main threaded stud
portion onto bronze nosepiece
until flats align with two cotter
pin holes in terminal body.
Tip: Turn nosepiece completely
into threaded stud portion.
Flats will be close and may
only require a small half turn
to align with cotter pin holes.
Insert two cotter pins and
spread. Clean excess Loctite
®
from terminal body using
special care to ensure that
there is no red Loctite
on
®
threaded stud.
Loctite is a trademark of Henkel AG & Company KGaA
MKIV Ocean Unit 3
16
Advertisement
Table of Contents
