Electrical Connections - Evikon PluraSens E2658 Series User Manual

E2658-N2O Rev 12.03.2021

Electrical connections

Unscrew four lid screws and detach the lid from the device. Use the M25 cable gland to let
in the cables of the power supply and of the external devices. Without turning on the power,
plug the power cable, and connect the analog/relay outputs and/or digital interface
terminals to the necessary devices according to the relevant connection diagram.
Version with PSU and relays Version with PSU and without relays
Version without PSU and with relays Version without PSU and relays
11