Before removing the WLAN module, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the WLAN module:
1.
Remove the plastic protector from the antenna or antennas (1).
2.
Carefully disconnect the antenna cable or cables from the module (2).
3.
Remove the Phillips M2.0 × 2.5 screw (3), and then remove the WLAN module (4).
NOTE:
Models have either one or two WLAN antennas. On models with two antennas, the #1 white
WLAN antenna cable connects to the WLAN module #1 Main terminal. The #2 black WLAN antenna cable
connects to the WLAN module #1 Aux terminal.
(Preparation for disassembly on page
(Bottom cover on page
Battery on page
29).
27).
Component replacement procedures
27).
31