Graco SaniSpray HP 65 Operation - Repair - Parts page 8

Portable hopper sprayer
Hide thumbs Also See for SaniSpray HP 65:
Table of Contents

Advertisement

Warnings
GROUNDING
This product must be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electric current. This product is
equipped with a cord having a grounding wire with an appropriate grounding plug. The plug
must be plugged into an outlet that is properly installed and grounded in accordance with all
local codes and regulations.
Improper installation of the grounding plug is able to result in a risk of electric shock.
This product is for use on a nominal 120V or 230V circuit and has a grounding plug similar
to the plug illustrated below.
Only connect the product to an outlet having the same configuration as the plug.
Do not modify the plug provided; if it does not fit the outlet, have the proper outlet installed
by a qualified electrician.
Do not use an adapter with this product.
When repair or replacement of the cord or plug is required, do not connect the grounding
wire to either power terminal.
The wire with insulation having an outer surface that is green with or without yellow stripes
is the grounding wire.
Check with a qualified electrician or serviceman when the grounding instructions are not
completely understood, or when in doubt as to whether the product is properly grounded.
Extension Cords:
Use only a 3-wire extension cord that has a grounding plug and a grounding receptacle that
accepts the plug on the product.
When using the sprayer outdoors, use an extension cord suitable for outdoor use.
Make sure your extension cord is not damaged.
When using an extension cord, be sure to use a cord heavy enough to carry the current that
your sprayer draws. An undersized cord results in a drop in line voltage and loss of power
and overheating. When in doubt use the next heavier gauge. The smaller the gauge
number the heavier the cord. See chart for appropriate sizes and lengths:
AWG (American Wire Gauge)
8
WARNING
120V US
230V
Conductor Size
16
12
230V ANZ
Length
Metric
Maximum
2
25 ft. (8 m)
1.5 mm
2
50 ft. (15 m)
2.5 mm
ti24583b
3A7653D

Advertisement

Table of Contents
loading

This manual is also suitable for:

25r79225r95425r94825r94625r962

Table of Contents