Table of Contents
Advertisement
Accessories
The following accessories are supplied with the indoor unit.
The type and quantity may differ depending on the specifications.
AM✴✴✴FN1DCH✴ / AM✴✴✴FN2DCH✴
Pattern sheet
Insulation drain
AM✴✴✴FN4DCH✴
Insulation
Cable-tie
pipe
Selecting the Installation Location
Indoor Unit
• There must be no obstacles near the air inlet and outlet.
• Install the indoor unit on a ceiling that can support its weight.
• Maintain sufficient clearance around the indoor unit.
• Make sure that the water dripping from the drain hose runs away correctly and safely.
• The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users)
• Rigid wall without vibration.
• Where it is not exposed to direct sunshine.
• Where the air filter can be removed and cleaned easily.
• As a rule, the unit cannot be installed at a height of less than 2.5 m.
• It is possible to install the unit at a height of between 2.2~2.5m from the ground, if the unit has a duct
CAUTION
with a well defined length (300mm or more) to avoid fan motor blower contact.
• If you install the cassette or duct type indoor unit on the ceiling with humidity over 80%, you must
apply extra 10mm of polyethylene foam or other insulation with similar material on the body of the
indoor unit.
DVM S NASA_Global 4-WC_사우디향_IM_EN_04191A.indd 5
Flexible hose
Insulation
Drain hose
user manual
user manual
Installation
Clamp
manual
Installation
manual
Pattern sheet
5
2013-11-05 오전 11:30:12
Advertisement
Table of Contents
