Samsung AM FN1DCH Series Installation Manual page 35

Changing a particular option
You can change each digit of set option.
Option SEG1
Explanation PAGE
Remote
Controller
Display
Indication
Indication and
Details
0
• When changing a digit of an indoor unit address setting option, set the SEG3 as 'A' .
• When changing a digit of indoor unit installation option, set the SEG3 as '2' .
NOTE
Ex) When setting the 'buzzer control' into disuse status.
Option
Explanation
Indication
• If you are using heat pump model, mixed operation mode (two or more indoor units operating in
different operation mode simultaneously) is not available when the indoor units are connected to
CAUTION
same outdoor unit. If you set the master indoor unit with a remote controller, outdoor unit will operate
in the mode which was set in the master indoor unit.
DVM S NASA_Global 4-WC_사우디향_IM_EN_04191A.indd 35
SEG2
The option mode
MODE
you want to change
Details Indication Details Indication
Option
D
mode
SEG1 SEG2
PAGE MODE
0 D
SEG3 SEG4
The tens' digit of an
option SEG you will
change
Details Indication Details
Tens' digit
1~6 0~9
of SEG
SEG3 SEG4
The option mode The tens' digit of
you want to an option SEG
change you will change
2 1
SEG5 SEG6
The unit digit of an
option SEG you will The changed value
change
Indication Details Indication Details
The
Unit digit
0~9 changed 0~F
of SEG
value
SEG5 SEG6
The unit digit of
The changed
an option SEG
value
you will change
7 1
2013-11-05 오전 11:30:35
35