Technical Data; Standards And Operating Conditions; Conformities And Approvals; Protection Of Persons And Device Protection - Lenze g500-S Series Mounting And Switch-On Instructions

Technical data

Standards and operating conditions

Conformities and approvals

Technical data
Standards and operating conditions
Conformities and approvals
Conformities
2009/125/EC
2011/65/EU
CE 2006/42/EC
2014/35/EU
2014/30/EU
TP TR 004/2011
EAC
TP TC 020/2011
Approvals
e-CFR 431
CSA C390
cULus
UL 1004-1
UL 1004-8
CSA 22.1 No. 100
UL 1004-1
CUR UL 1004-8
CSA 22.1 No. 100
GB 12350
GB 18613
GB
GB/T 26572

Protection of persons and device protection

Degree of protection
EN 60529, EN
EN
60034-5
Temperature class
Utilization
EN 60034-1
Insulation system
Permissible voltage
IVIC C IEC 60034-18-41

EMC data

Noise emission
Fulfils requirements
EN 60034-1
according to
Noise immunity
- EN 60034-1
64
ErP Directive and associated regulations on the ecodesign of electric motors
RoHS Directive
Machinery Directive, only relevant for (permissible) safety components, such as encoder or brake
Low-Voltage Directive
EMC Directive (reference: CE-typical drive system)
Eurasian conformity: Safety of low voltage equipment
Eurasian conformity: Electromagnetic compatibility of technical means
Energy Efficiency Program for Certain Commercial and Industrial Equipment - does not apply to
8400 motec
Energy Efficiency Test Methods for Three-Phase Induction Motors - does not apply to 8400 motec
UL Standard for Rotating Electrical Machines - does not apply to 8400 motec
UL Standard for Inverter Duty Motors - does not apply to 8400 motec
CSA Standard for motors and generators - does not apply to 8400 motec
UL Standard for Rotating Electrical Machines - only applies to 8400 motec
UL Standard for Inverter Duty Motors - only applies to 8400 motec
CSA Standard for motors and generators - only applies to 8400 motec
GB Standard: Safety requirements of small-power motors
GB Standard: Minimum allowable values of energy efficiency and energy efficiency grades for
small and medium three-phase asynchronous motors - does not apply to 8400 motec
GB Standard: Requirements on concentration limits for certain restricted substances in electrical
and electronic products
IP54
IP55
IP65
IP66
B (130 °C)
F (155 °C)
at 500 V
A final overall assessment of the drive system is indispensable
Requirements met
Information applies to the mounted and ready-
for-use state
Utilization
Insulation system
A final overall assessment of the drive system is
indispensable