Connection Via Han Connector - Lenze g500-S Series Mounting And Switch-On Instructions

Connection via HAN connector

The power, brake and temperature monitoring can be connected in the HAN connector.
The designs HAN 10E or HAN modular with two power modules (16 A or 40 A) are available.
The HAN 10E connector is only available for motors with the connection method
Y/Δ.
An additional rectifier can be connected with HAN modular.
Position of the connections
Note Meaning
1 Power connection
Brake connection
PE connection
Connection of temperature monitoring
Additionally for HAN-Modular:
• Rectifier connection
HAN 10E connector
The motor connection is specified in the counter plug.
The connector is only suitable for motors with the connection method Y/Δ.
Bridge arrangement in the mating connector HAN 10E
Contact Name
6-7-8 y
1-6 Δ
2-7
3-8
HAN 10E pin assignment
Contact
1 U1
2 V1
3 W1
4 +/AC
5 -/AC
6 W2
7 U2
8 V2
9 TCO/+PT1000
10 TCO/-PT1000
HAN modular connector
The motor connection is specified in the terminal box.
1
Meaning
Circuit
Meaning
Motor winding phase
Brake
Motor winding phase
Temperature monitoring
Electrical installation
Motor connection
Connection via HAN connector
Illustration
6 7 8 9 10
1 2 3 4 5
45