Step 9. Attach Mounting Hardware - Kraus KHU100-26 Installation Manual

Step 8. Secure sink to countertop

Step 9. Attach mounting hardware

NOTE: Use acetone or rubbing alcohol to remove any excess sealant.
· Use a bead of silicone (or preferred adhesive) around the rim of the
sink. Check the alignment of the sink to the cutout in the countertop.
Place sink over cutout hole and press firmly.
· Attach mounting hardware to secure bowl. Remove excess sealant
from inside lip.
· Allow sealant to set for 30 - 60 minutes.
14