Installing The Speaker - Canon Super G3 FAX Board-AH1 Service Manual

10) Free the Speaker Harness from the Ring Core, and connect the harness to the Fax
Unit.
• 1 Connector
• 1 Wire Saddle
11) Secure the 2 harnesses of the Fax Unit in place using the Edge Saddle and the
Reuse Band of the Controller Box, and connect the harnesses to the Controller PCB.
• 2 Connectors
• 1 Reuse Band
• 1 Edge Saddle
x2
x2
6
Installation > Installation Procedure Installation
F-6-16
6 Installation > Installation Procedure Installation

■ Installing the Speaker

1) Open the Right Lower Cover and remove the Right Upper Cover.
• 2 Screws
• 2 Hooks
NOTE:
If a 3 Way Unit is installed, open the Right Upper Cover.
F-6-15
2) Open the Front Cover.
x2
6-7
F-6-17
6-7