Advertisement
4) Push the lock lever [1] to remove the boot ROM
[2].
[1]
[2]
5) Fit the included boot ROM [1] in place.
6) Connect the cables and put back the cover discon-
nected and removed in steps 2) and 3), respectively.
7) Turn on the main power switch.
8) When a message has appeared prompting you to
turn off and then on the power, perform the shut-
down sequence to turn off the main power switch,
and then turn it back on.
F-1-5
[1]
F-1-6
3. Checking the Connection
Go through the following to make sure the machine
correctly recognizes the presence of the boot ROM:
1) Check the Check Counter key [1] on the control
panel.
1
4
7
2) Press the Check Device Configuration key [1].
3) Check to see that'UFR II Printer KIt-L1' are indicat-
ed as accessories.
1.2.2 Installing the Soft-
ware
1. Network Setting
MEMO:
Check that the network setting of the host machine is
completed.
4
2
3
5
6
[1]
1 2 3
8
9
0
F-1-7
F-1-8
[1]
Advertisement
