Sssw-Sw30 - Canon Super G3 FAX Board-AH1 Service Manual

5
Service Mode Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW30

■ SSSW-SW30

● Functional Construction
Bit Function
0 not used
1 not used
2 not used
3 not used
4 not used
5 Dial tone detection method switching New detection method Old detection method
6 Non-disclosure
7 not used
Detailed Discussions of Bit 5
Switching the detection method when executing the dial tone detection at the time of calling.
1: New detection method (Default)
0: Old detection method
5 Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW30 Service Mode
1 0
- -
- -
- -
- -
- -
Fixed -
- -
T-5-17
Caution:
Be sure to switch the following switches when switching the switch.
• In case setting the switch as 1 (new detection method):
/* DIAL TONE01 */ B11000001
/* DIAL TONE02 */ 350
/* DIAL TONE03 */ 10
/* DIAL TONE04 */ 1
/* DIAL TONE05 */ 100
/* DIAL TONE06 */ 0
/* DIAL TONE07 */ 12
/* DIAL TONE08 */ 7
/* DIAL TONE09 */ 3
• In case setting the switch as 0 (old detection method):
/* DIAL TONE01 */ B11000001
/* DIAL TONE02 */ 600
/* DIAL TONE03 */ 10
/* DIAL TONE04 */ 10
/* DIAL TONE05 */ 0
/* DIAL TONE06 */ 0
/* DIAL TONE07 */ 0
/* DIAL TONE08 */ 5
/* DIAL TONE09 */ 0
Detailed Discussions of Bit 6
This bit is used for other function. (Non-disclosure function)
Caution:
The setting is fixed as '1', and do not change it.
5-13
5-13