Assembly And Installation; Stand Assembly; Connect To Antenna; Turning On - Kogan 9 Series User Manual

ASSEMBLY AND INSTALLATION

BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This will help to prevent damage.

1. Stand assembly

a. Attach first stand to base of TV, ensuring R and L stands are on correct
side. You can install either one first.
b. Insert two 14mm screws and use Phillips head screwdriver
(not supplied) to tighten.
c. Repeat these steps for second stand.

2. Connect to antenna

a. Connect an antenna cable (not supplied) via the 'ANT' input port at the
back of the TV.
b. Ensure the antenna cable is also connected to a working antenna, either
via an antenna wall socket in your home, or directly.
3. Turning TV on
In the standby mode, press the button to turn on the TV.
In the boot state, long press the middle button to shut down.
TURNING TV OFF
POWER ( )
Press the button on the remote control to enter standby mode.
To power down the TV completely, unplug the power cord from the power
outlet.
Do not leave your set in standby mode for long periods of time. If you will not
use the TV for a long time, it is recommended to unplug the set from both the
power outlet and aerial.
6