ASSEMBLY AND INSTALLATION
BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This will help to prevent damage.
1. Stand assembly
a. Put the machine flat first, distinguish left and right base and base
installation front and back direction, then install the bases in the
bottom of the machine back cover as arrow direction in figure.
b. Align screw holes, then fasten screws (notice that base module has
to be adjusted at figure status, otherwise it cannot be installed in.)
2. Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert two 1.5V AAA size batteries, making sure to match the polarity
markings(+/-) of the batteries with the diagram inside
the compartment.
c. Replace battery compartment cover.
m
6
screw
m