SETTINGS
Screen Saver
Screen Saver - Press ▲,▼ button to
select the option then press OK button to enter the
sub-menu. (Optional: Turn screen o , Backdrop,
Colors).
When to Start - Press ▲,▼ button to select the
option then press OK button to enter the sub-menu.
(Optional: 5 minutes, 10 minutes, 30 minutes, 1 hour,
2 hours).
Put device to sleep - Press ▲,▼ button to select the option then press OK
button to enter the sub-menu. (Optional: 30 minutes, 1 hour, 3 hours, 6 hours,
12 hours, Never).
Start now - Press ▲,▼ button to select the option then press OK button to
enter screen saver.
Location
Location status- Press ▲,▼ button to select the
option then press OK button to enter the
sub-menu. (Optional: Use Wi-Fi to estimate
location, O ).
Usege & Diagnostics
Usege & Diagnostics- Press ▲,▼ button to select
the option then press OK button to choose
ON/OFF.
Accessibility
Audio Description - Press ▲,▼button to select
the option then press OK button to choose
ON/OFF.
Visually Impaired - Press ▲,▼button to select the
option then press OK button to enter the
sub-menu. (Need: Audio Description ON).
Hearing Impaired - Press ▲,▼button to select the
option then press OK button to choose ON/OFF.
Captions - Press ▲,▼button to select the option
then press OK button to enter the sub-menu.
High contrast text - Press ▲,▼button to select the option then press OK
button to choose ON/OFF.
Screen saver
Text to speech- Press ▲,▼ button to select the option then press OK button
to enter the sub-menu.
Screen saver
Backdrop
Accessibility Shortuct- Press ▲,▼ button to select the option then press OK
button to enter the sub-menu.
When to start
Reset
After 5 minutes of inactivity
Press OK button to enter the sub-menu.
Put device to sleep
After 30 minutes of inactivity
Reset-Erase everything.
Start now
Remote & Accessories
In this menu, you can pair Bluetooth
devices.
1. Press the "RED" and "BLUE" buttons at the bottom of the remote control for
5 seconds.
2. When the LED starts to flash, release it. The remote controller will send the
pairing signal to the TV and display the information fo the remote control on
the right side of the screen.
3. Press the OK button to display the pairing. If the paired is displayed, the
connection is successful.
4. If the couldn't pair appears, the connection fails. Wait 30 seconds and then
press the "RED" and "BLUE" buttons at the bottom of the remote control for 5
seconds to repeat the previous steps.
5. Press BACK button return to the previous menu.
Text to speech
Accessibility shortcut
Services
13