Assembly And Installation; Stand Assembly; Connect To Antenna - Kogan 5 Series User Manual

ASSEMBLY AND INSTALLATION

BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This will help to prevent damage.

1. Stand assembly

a. Attach stands to base of TV
b. Insert two 20 mm screws for each stand and use Phillips head
screwdriver (not supplied) to tighten.
1a 1b

2. Connect to antenna

a. Connect an antenna cable (not supplied) via the 'ANT' input port at the
back of the TV.
b. Ensure the antenna cable is also connected to a working antenna, either
via an antenna wall socket in your home, or directly.
2a
Antenna
wall socket
2b
Antenna cable
(not supplied)
USB 2.0
AUDIO OUT
6