Troubleshooting - Kogan 9 Series User Manual

TROUBLESHOOTING

Please make these simple checks before calling service. These tips
may save you time and money since charges for receiver installation
and adjustements of customer controls are not covered under your
warranty.
"Ghost" Or double image
This may be caused by obstruction to the antenna may improve the picture.
No power
• Check if the TV's AC power cord is plugged into the outlet.
• Unplug the TV, wait for 60 seconds.
Then reinsert plug into the outlet and turn on the TV again.
No picture
• Check antenna connections at the rear of the TV to see if it is properly connected
to the TV.
• Possible broadcast station trouble. Tryanother channel.
• Adjust the contrast and brightness settings.
• Check the closed captions control. Some TEXT modes could block the screen.
Good picture but no sound
• Increase the volume level by pressing VOL+ button on the remote control or on
the TV side control panel.
• Press the MUTE button on the remotecontrol to ensure mute is o .
Good sound but poor color
Adjust the contrast, color and brightness settings
Poor Picture
Poor picture quality may occur when an activated S-VHS camera or camcorder is
connected to your TV and other peripherals at the same time. Switch o one of
the peripherals.
Snowy picture and noise
Check the antenna connection
Horizontal dotted line
This may be caused by electrical interference (e.g. hair dryer, nearby neon lights,
etc.) Turn o the equipment.
TV not responding to remote control
• Check whether the batteries are working. Replace if necessary.
• Clean the remote control sensor lens on the TV.
• You can still use the buttons on the side of your TV.
Pixels (dots) that are always dark or
always lit
Your TV is precision-manufactured using an extremely high level if technology.
However, sometimes pixels may not display correctly.
These types of occurrences are inherent to this type of product and do not
constitute a defactive product.
19