Compatibility With Legacy Geonet Products; Accessories; Networks; Table 3: Legacy Compatibility Chart - Geokon GeoNet 8800 Series Instruction Manual

Wireless data acquisition network
Hide thumbs Also See for GeoNet 8800 Series:
Table of Contents

Advertisement

6 | INTRODUCTION | GEOKON

1.7 COMPATIBILITY WITH LEGACY GEONET PRODUCTS

8800-XX-XXX-XXX models are compatible with the following legacy GeoNet
products:
Legacy Part
Number3:
New Part Number
8800-4-1A
8800-NA-SUP-232
RS-232 GeoNet Supervisor, North America
8800-4-2A
8800-NA-SUP-USB
USB GeoNet Supervisor, North America
8800-3-1A
8800-NA-01C-CBL
Single Channel VW GeoNet Node, Cable Gland, North America
8800-3-2A
8800-NA-01C-10P
Single Channel VW GeoNet Node, 10‑Pin Bulkhead, North America
8800-6-1A
8800-NA-ADR-CBL
Addressable GeoNet Node, Cable Gland, North America
8800-4-1B
8800-BZ-SUP-232
RS-232 GeoNet Supervisor, Brazil
8800-4-2B
8800-BZ-SUP-USB
USB GeoNet Supervisor, Brazil
8800-3-1B
8800-BZ-01C-CBL
Single Channel VW GeoNet Node, Cable Gland, Brazil
8800-3-2B
8800-BZ-01C-10P
Single Channel VW GeoNet Node, 10‑Pin Bulkhead, Brazil
8800-6-1B
8800-BZ-ADR-CBL
Addressable GeoNet Node, Cable Gland, Brazil
8800-4-1C
8800-AU-SUP-232
RS-232 GeoNet Supervisor, Australia
8800-4-2C
8800-AU-SUP-USB
USB GeoNet Supervisor, Australia
8800-3-1C
8800-AU-01C-CBL
Single Channel VW GeoNet Node, Cable Gland, Australia
8800-3-2C
8800-AU-01C-10P
Single Channel VW GeoNet Node, 10‑Pin Bulkhead, Australia
8800-6-1C
8800-AU-ADR-CBL
Addressable GeoNet Node, Cable Gland, Australia

TABLE 3: Legacy Compatibility Chart

1.8 ACCESSORIES

Supervisors and nodes can be shipped with the following accessories:
One omni-directional antenna (2.1 dBi). For other antenna options, please
contact
technical support.
GEOKON
Two D cell alkaline batteries
Four desiccant packs
Supervisors can be shipped with the following additional accessories:
Set of two screwdrivers, one Phillips head and one flat-head
One firmware upgrade cable
One RS-232/USB cable (depending on the model purchased)

1.9 NETWORKS

GeoNet uses network technology that is self-configuring and self-healing. If all
nodes are in range of the supervisor, then data from the nodes is sent directly
from the nodes to the supervisor (a star topology).

Advertisement

Table of Contents
loading

Table of Contents