2 | INTRODUCTION | GEOKON
1.2 MODEL IDENTIFICATION
The 8800 series model numbers are composed codes that together indicate the
following information about each unit:
Series
Region
2:
Model Type
8800
NA: North America
SUP: Supervisor
8800
BZ: Brazil
01C: 1 Channel Node
8800
AU: Australia
04C: 4 Channel Node
08C: 8 Channel Node
ADR: Addressable Node
Example: 8800-NA-01C-CBL
TABLE 2: GeoNet Model Identification
1.3 SUPERVISOR
Supervisor model types are distinguished by their physical connection to a PC.
The network supervisor unit controls the network and collects all data from the
nodes. The supervisor reads battery and temperature data, but it does not
possess sensor-reading functionality. Data stored by the supervisor may be
collected using Agent software or a Modbus client.
1.3.1 RS-232 (8800-XX-SUP-232)
Connects to a PC running the Agent program or other Modbus RTU master via
an RS-232 cable.
FIGURE 1: Network Supervisor with RS-232 Connector (8800-XX-SUP-232)
Supervisor PC Connection
Node Sensor Connection
232:RS-232 Com
CBL:Cable Gland
USB:USB Com
10P:10 Pin
1: