ELGO-PLUS SpringerMAX-PRO Instruction page 33

6.10. Machine maintenance table
Regular maintenance
Hydraulic oil Check level
Change
Engine oil Check level
Change
Pins Check
Screws and Check/
rubber tracks tighten
Lubrication Perform
Electric Check
cables
Change
Hydraulic Check
hoses
Change
X(1) Empty the tank, when the oil filter is not heavily soiled, you can use it again
Mini digger is filled up with hydraulic oil AGIP (ENI) ARNICA 46.
To next fill up it is recommended the same oil or other with the same parameters:
ISO L-HV and DIN 51524 t.3 HVLP
Important:
For detailed information on fuel quality, lubrication instructions and servicing of the
power unit, refer to the Briggs&Stratton engine manual.
Each time After first 5
hours of
using
x
x
x
x(or 10h)
x
Replace in case of holes in isolations or brokes
x
Replace in case of leaks or braid is visible
32
3 months
or 50
hours
X X(1)
x x
x x
6 months 12
or 100 months
hours or 300
hours
X
x