System Fan; Removing The System Fan - Dell OptiPlex 7480 All-In-One Service Manual

Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card slot.
2. Slide the solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x2.5) to secure the solid-state drive to the system board.
Next steps
1. Install the system-board
2. Install the back cover.
3. Install the cable cover (optional).
4. Install the stand.
5. Follow the procedure in

System fan

Removing the system fan

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the cable cover
4. Remove the back cover.
5. Remove the system-board
About this task
The following image indicates the location of the system fan and provides a visual representation of the removal procedure.
34 Removing and installing components
shield.
After working inside your computer.
Before working inside your
(optional).
shield.
computer.