Dell OptiPlex 7480 All-In-One Service Manual page 94

Table 7. System setup options—Intel Software Guard Extensions menu(continued)
Intel Software Guard Extensions
Enclave Memory Size
Table 8. System setup options—Performance menu
Performance
Multi Core Support
Intel SpeedStep
C-States Control
Intel TurboBoost
HyperThread Control
Table 9. System setup options—Power Management menu
Power Management
AC Recovery
Enable Intel Speed Shift technology
Auto On Time
Deep Sleep Control
Fan Control Override
USB Wake Support
Wake on LAN/WLAN
Block Sleep
94 System setup
Set the Intel Software Guard Extensions Enclave Reserve Memory Size.
By default, the 128 MB option is enabled.
Enable multiple cores.
By default, the option is enabled.
Enable or disable Intel Speedstep Technology.
By default, the option is enabled.
NOTE: If enabled, the processor clock speed and core voltage are
adjusted dynamically based on the processor load.
Enable or disable additional processor sleep states.
By default, the option is enabled.
Enable or disable Intel TurboBoost mode of the processor.
By default, the option is enabled.
Enable or disable HyperThreading in the processor.
By default, the option is enabled.
Enables the system to turn on automatically, when AC is inserted.
By default, the Power Off option is enabled.
Enable/disable Intel Speed Shift Technology support . Setting this option to enable to
allows the operating system to select the appropriate processor performance
automatically.
By default, the option is enabled.
Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Enable or disable the Deep Sleep mode support.
By default, the Enabled in S4 and SS option is enabled.
Enable or disable the fan control override feature.
By default, the option is disabled.
Enable the USB devices to wake the computer from Standby.
By default, the option is enabled.
Enable or disable the computer to be powered on by special LAN signals.
By default, the option is disabled.
Enable or disable block sleep.
By default, the option is disabled.