Steps
1. Place the back cover on the middle frame and system-board shield and align the tabs on the back cover with the slots on the middle
frame.
2. Slide the back cover to lock the release tab under the latch on the system-board shield.
Next steps
1. Install the
cable cover
(optional).
2. Install the stand.
3. Follow the procedure in
Hard drive
Removing the hard drive
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
cable cover
4. Remove the
back
cover.
About this task
The following image indicates the location of the hard drive and provides a visual representation of the removal procedure.
24
Removing and installing components
After working inside your
computer.
Before working inside your
(optional).
computer.