Removing And Installing Components; Recommended Tools; Screw List - Dell OptiPlex 7480 All-In-One Service Manual

Removing and installing components

Recommended tools

The procedures in this document may require the following tools:
• Phillips screwdriver #1
• Plastic scribe

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type
is restored when the component is replaced.
NOTE: Some systems have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. OptiPlex 7480 All-in-One screw list
Component
Cable cover—optional
System-board shield
Bottom cover
M.2 2230 solid-state drive
M.2 2280 solid-state drive/Intel
Optane memory
System fan
Wireless-card shield
Wireless card
Camera assembly
10 Removing and installing components
Screw type
M3x9
M3x5
M3x5
M2x2.5
M2x2.5
M3x5
M2x2.5
M2x2.5
M3x5
Quantity
1
5
4
1
1
3
2
1
2
2
Screw image