Clutch - BMW R 1200 ST Rider's Manual

Activating ASC function
4
54
Press and hold down
ASC button 1.
z
ASC symbol no longer
shows; if self-diagnosis
has not completed the ASC
symbol starts flashing.
When the ASC symbol dis-
appears, release the ASC
button within five seconds.
The ASC warning light re-
mains off.
If ASC self-diagnosis did not
complete, the ASC warning
light continues to flash.
The ASC function is activ-
ated.
Instead of pressing the ASC
button, you have the option
of switching the ignition off
and then on again.
An ASC fault has
occurred if the ASC
warning light shows when the
motorcycle accelerates to a
speed in excess of 10 km/h
after the ignition was switched
off and then on again.

Clutch

Adjust the clutch lever
If the position of the
clutch fluid reservoir is
changed, air can enter the
clutch system.
Do not twist the handlebar
fitting or the handlebars.
Attempting to adjust the
clutch lever while riding
the motorcycle can lead to
accidents.
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.
Turn adjusting screw 1
clockwise.
The adjusting screw is
indexed and is easier
to turn if you push the clutch
lever forward.
Span between handlebar
grip and clutch lever in-
creases.