BMW R 1200 ST Rider's Manual page 111

Lower the mudguard into
position from in front, noting
the lug on the rear section
of the mudguard.
Install screws 1 on left and
right.
Braking efficiency is
impaired if the brake
pads are not correctly bedded
against the discs.
Before riding off, always
check that the brakes bite
as soon as the brake lever
is pulled or the brake pedal
depressed.
Operate the brake several
times until the brake pads
are bedded.
Removing rear wheel
Parts of the exhaust sys-
tem can be hot.
Do not touch hot parts of the
exhaust system.
Place the motorcycle on an
auxiliary stand; BMW Motor-
rad recommends the BMW
Motorrad rear-wheel stand.
Install the rear-wheel stand
( 113)
with OA Centre stand:
Make sure the ground is
level and firm and place
the motorcycle on its centre
stand.
Slacken clamp 1.
Remove screw 2 for the
bracket of the end silencer
from the rear footrest.
7
109
z