Singer Steam Works Classic Instruction Manual page 6

Folding Hanger Assembly
• Secure the Steam Head Hanger assembly to the Telescopic Pole.
• Tilt the hook of the Rotating Hanger and insert it into the hole on
the flat side of the Steam Head Hanger. Press gently to lock.
• Pull the arm of the Rotating Hanger up until the sides are
completely extended.
• Lock the horizontal bar in place by aligning the dots on the bar.
Garment Clips Assembly and Use
• Snap the Garment Clips into the holes on the horizontal bar of the
Folding Hanger.
• Clip the Garment Clip Bar to the bottom of the Telescopic Pole.
• To use, hang the garment from the top clips and secure with the
bottom clips, pulling the garment taut to steam or crease.
4
E_Instruction Manual.indd 4
WARNING: ALWAYS TURN OFF THE STEAMER BEFORE ATTACHING
ACCESSORIES TO AVOID IN JURY.
6/28/2012 10:30:11