Table of Contents
Advertisement
EAW DSP Innovations
DynO™
DynO™ is a revolutionary processing technique that allows
EAW Engineers to maximize output from a given amplifier
– transducer combination. As opposed to conventional
limiting which simply views amplifier output and driver
power handling in aggregate (i.e. a driver can handle 100
watts or an amplifier can produce 500 watts), the DynO
process involves much more detail and complexity. By
studying the headroom of all electronic and acoustical
devices frequency by frequency and utilizing frequency‐
dependent limiting algorithms in combination with more traditional band-pass limiting, a system's
broadband headroom can be maximized regardless of the input signal spectrum.
EAW Focusing™
Even in well-designed professional loudspeakers, inherent sonic
flaws such as phase plug reflections, horn resonances and cone
resonances can cause undesirable audible artifacts. Implemented
through advanced digital signal processing, EAW Focusing™
generates complex filters that correct these imperfections and
improve the transient response of a loudspeaker. This is
accomplished by isolating linear, time invariant and spatially
consistent anomalies in a loudspeaker's response and eliminating
them through advanced processing. The result is a high output,
controlled loudspeaker that provides a pristine transient response
equal to that of a direct radiating studio monitor.
17
Advertisement
Table of Contents
