Rs118 Rear Input Panel Diagram - EAW PROFESSIONAL RS121 User Manual

RS118 Rear Input Panel Diagram

1. Level (Gain) Control
Adjusts the level of the INPUT signal. Turning counterclockwise will reduce the output level and
turning clockwise will raise the overall output level of the speaker.
2. XLR Input Connector
Two balanced XLR input connectors for analog input signal.
3. XLR Thru/Xover (Output) Connector
Two balanced XLR output connector to daisy-chain input signal to other speakers. This signal can
either come directly from the input connector (unaltered by the speaker's internal processing), or
high-passed at the XOVER frequency based on the position of the OUTPUT button (4).
4. Output Button
This button is used to toggle the processing of the XLR THRU/XOVER output signal. Setting the button
to THRU outputs a signal unaltered by the speaker's internal processing, whereas setting the button to
XOVER applies a high-pass filter to the output signal at the frequency determined by the XOVER
button position (5). The button should be set to the THRU position if daisy-chaining to other
subwoofers, or if connecting a full-range speaker that utilizes an external high-pass filter. The button
should be set to XOVER if outputting directly to RS two-way speakers or if the connected full-range
speaker does not have an integrated high-pass filter option.
5. Crossover Button
This button is used to toggle between crossover frequencies – the two crossover frequency options
are 80Hz and 100Hz.
12