Operating The Appliance; Preparing The Washing Machine; Switching On The Appliance/Selecting A Programme; Change The Programme Default Settings - Bosch WAT Series Instruction Manual And Installation Instructions

Table of Contents

Advertisement

1
Operating the
appliance
P reparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
From ~ Page 12
Connect the mains plug.
1.
Turn on the water tap.
2.
Open the door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Cotton programme set at the
factory is then always displayed.
The current settings and programme
information light up at full brightness
and the display A flashes.
The settings that can be selected light
up at half brightness.
Notes
Temporary flashing of the displayÛ
informs you to run the programme
Drum Clean or any other
programme soon at a washing
temperature of at least 60 °C.
If the E 3s display flashes, the
childproof lock is active.
You must deactivate this first before
you can change settings or start the
programme. ~ Page 31

Operating the appliance

In appliances with a drum light:
The drum is lit after switching on the
appliance, after opening and closing the
door and after starting a programme.
The light switches off automatically.
You can:
Use this programme and load
laundry. ~ Page 30
Or select another programme.
You can find an overview of all
programmes on the printed
supplement for the installation and
operating instructions.
Or change the programme default
settings. ~ Page 29
And/or select additional programme
settings. ~ Page 29
Change the programme
default settings
To change the current settings, touch
the button you require on the control
panel and the relevant indicator will
switch to full brightness.
You can change Finished in-time by
touching N or M.
Programme default settings
~ Page 26
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
To do this, touch the required control
panel; the relevant display switches to
full brightness.
Additional programme settings
~ Page 27
en
29

Advertisement

Table of Contents
loading

Table of Contents