Transportation - Bosch WAT Series Instruction Manual And Installation Instructions

Transportation

E.g. when moving house
Preparatory work:
Turn off the tap.
1.
Release the water pressure in the
2.
supply hose: ~ "Filter in the water
supply blocked" on page 41
Disconnect the washing machine
3.
from the mains power supply.
Drain the remaining water: ~ "The
4.
drain pump is blocked, emergency
draining" on page 40
Detach the hoses.
5.
Empty the dispensers. ~ Page 36
6.
Caution!
Risk of damage to the appliance
caused by detergent/fabric softener
leaking from the dispensers
Leaking detergent/fabric softener
can prevent the appliance from
working correctly, e.g. due to
damage to the electronics.
Empty the dispensers before
transporting the appliance.
Fitting the transportation securing
means:
Remove the covers and keep them
1.
in a safe place.
If required, use a screwdriver.
Positioning and connecting
Insert all four sleeves.
2.
Clip the mains cable securely in the
holders. Insert the transportation
securing bolts and tighten them with
a wrench (WAF 13).
Before switching on the appliance
again:
Notes
The transit securing devices must
■
be removed. ~ Page 14
To prevent unused detergent from
■
flowing straight into the drain during
the next wash, pour approx. 1 litre of
water into the manual dosing
compartment, select the Drain
program and start this program.
en
19