Installing Cartridges; Selecting Books - Franklin BOOKMAN ENC-2005 User Manual

Installing Cartridges

Warning: Never install or remove a
cartridge when your BOOKMAN is on.
If you do, information that you've en-
tered in the built-in book, and in any in-
stalled cartridge, will be erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs of the cartridge
with the notches in the slot.
4. Press the cartridge down
until it snaps into place.
Removing Cartridges
Warning: When you remove a
cartridge to install another, informa-
tion that you entered in the
removed cartridge will be erased.

Selecting Books

Once you have installed a cartridge
in your BOOKMAN, you can select
which book you want to use.
1. Turn BOOKMAN on.
2. Press
CARD
These are sample books.
3. Press or
book you want to use.
4. Press
ENTER
Resuming Where You Left Off
You can turn off your BOOKMAN
at any time. When you turn your
BOOKMAN on again, the screen
that you last viewed reappears.
3
.
to highlight the
to select it.